Gain:
  |
| gain |
The Gain Agent is the plug-in used to adjust the gain of a signal within EigenD.
  |
 |
| volume | input |
The volume input can be used to receive volume information from upstream Agents, or as a value set by the user to adjust the power of incoming signal.
 |
|
| audio | input |
The audio input is used to receive audio data from upstream Agents. If the channel count is set to 2, then there are two audio input ports, labelled 'left audio input 1' and 'right audio input 2' (see 'Channel Count' below).
|
|
| audio | output |
The audio input is used to send audio data to downstream Agents. If the channel count is set to 2, then there are two audio output ports, labelled 'left audio input 1' and 'right audio output 2' (see 'Channel Count' below).
Channel Count:
The channel count is a value set by the user to determine the number of audio input and output channels that the Gain Agent requires. This depends on whether the Agent upstream produces a mono or stereo output - it is mono by default (therefore one audio input and one audio output).
None
Before using the Belcanto examples below, please make sure you have the desired Gain in the conversation using
|
 |
 |
| gain | X | listen |
where X is the number of the desired Gain Agent.
To set the channel count, use
|
 |
|
|
|
| channel | count | to | X | set |
where X is the desired channel count.
To set the value of the volume input, use
|
|
|
|
|
| volume | input | to | X | set |
where X is the desired value of the volume input.
UK
