written by: keyman
Better forget that setup ( not easy to undo in EigenD world)Hello,
my second help-Thread so far :-)
i tryed to experiment a bit with effects and soundfonts, but - what a pitty - the first sampler and the audio units are blocked. Theres nothing in the Sampler 1 and Audio Unit 1/2 that could cause the terrible silence. :(
Thanks very much for every help,
nico
blocked?!
From the beginning... (make sure you're running latest stable 1.2.12)
run EigenD-Factory setup-1
then EigenBrowser (command+B)
Carefully watch the tutorials... (and manual), again !
Pico Tutorial 3 - 05:25 to change the SAMPLER 1-2-3 soundfont - press and hold the mode key
- right key 4
- second mode key (right 1)
left keys correspond to the instruments (SAMPLER1- 2- 3- AU 1 AU 2 etc)
- left key 3 to browse the soundfonts ( check the EingenBrowser to see the changes)
Let's put that silence somewhere away from the PICO...
keyman
well at the other setups i made so far, everything works good.
but at one setup, sampler 3 and the clarinett are easily not working. is it possible to disable all the effects used for an instrument? I think the audio fx are the reason for the silence.
Better forget that setup ( not easy to undo in EigenD world)
Do it over again...
STAGE ( in unstable 1.3.8) does give a wonderful job at accessing all settings in a setup.
keyman
Please log in to join the discussions
UK
