Forum rss-feed

Forum

Pico: Clarinet & breath pipe

Most Recent

written by: GoneCaving

OK, I'm getting the breath pipe blocked dialog. Close inspection of the small holes suggests that the clear rubber inside the breath pipe is blocking the two small holes. Any way of unblocking this? Or is it going to be a matter of returning the breath pipe?

D

written by: GoneCaving

Thu, 10 Dec 2009 21:08:25 +0000 GMT

Hi,
First evening with my new pico & I'm wondering about the clarinet. I seem to get a note regardless of whether I use the breath pipe. Similarly for the cello, I get a note regardless of whether I use the strip controller. Is this a setting in the browser? (i can't check at this moment since the browser doesn't appear in 10.4.11 - I'm off to get a copy of snow leopard tomorrow!).

Duncan


written by: GoneCaving

Thu, 10 Dec 2009 21:36:41 +0000 GMT

I was also having issues with the sustain being permanently on. On a restart of EigenD, no sustain regardless of breathpipe, the cello works as expected, and the clarinet not at all.


written by: sam

Fri, 11 Dec 2009 09:08:25 +0000 GMT

Hi Duncan,

The behaviour you are describing leads me to believe that your breath pipe may be blocked with spit. Please try clearing out your breath pipe (please refer to Breath Pipe FAQ for details of how to do this) thoroughly and retrying.

If you have any further problems, please contact Customer Support.

Sam
Eigenlabs


written by: GoneCaving

Fri, 11 Dec 2009 14:14:41 +0000 GMT

HI Sam,
Tried that and am still having problems. It seems the breath pipe is either fully on or fully off.

Duncan


written by: aaronw

Mon, 14 Dec 2009 16:28:30 +0000 GMT

Hi Duncan,

Can you try the new release (1.0.8) which will be out shortly. This may help us to diagnose the problem with your breath pipe more easily.

Cheers

Aaron
Customer Support


written by: GoneCaving

Tue, 15 Dec 2009 19:33:16 +0000 GMT

Hi Aaron,
I will do. Any update on when it might be released?

Cheers,
Duncan


written by: john

Fri, 18 Dec 2009 11:36:12 +0000 GMT

Hi Duncan

1.0.8 is being uploaded to the website right now, it should be live by around 1pm. (today - 18/12/09)

John


written by: GoneCaving

Fri, 18 Dec 2009 11:37:35 +0000 GMT

Thanks for the update John. I'll make sure to try it over the weekend.

Duncan


written by: GoneCaving

Fri, 18 Dec 2009 21:58:35 +0000 GMT

OK, I'm getting the breath pipe blocked dialog. Close inspection of the small holes suggests that the clear rubber inside the breath pipe is blocking the two small holes. Any way of unblocking this? Or is it going to be a matter of returning the breath pipe?

D



Please log in to join the discussions