Forum rss-feed

Forum

General Discussion: Changing to user scale from MIDI

Most Recent

written by: keyman

Hi Francisco,

I took the liberty of look at it ;-)

Only thing i change was to do about space formatting of the sentence

keygroup 1 hey _____ scale____ to______ user 1 ____ set

(this is what IS actually inside the your talker) and changing to this, cures the problem

keygroup 1 hey scale to user 1 set

Some weird copy/paste??
Some are correct, like:

keygroup 1 hey scale to natural major set

others not so (but seem to work):

keygroup 1 hey scale to bebop tonic minor set

-.-
do try correcting this, if it fixes

Cheers
keyman

written by: fcolasanto

Wed, 10 Jun 2015 21:58:54 +0100 BST

Hey there,

I have a problem: I using a setup where I change scales from Max via MIDI.

If I use factory scales I have no problems, but when I call a user scale doesn’t work. The funny thing is this: if I call the user scale from commander using

keygroup 1 hey scale to user 1 set

it works fine, but using the same sentence inside the midi input talker doesn’t work…

What can I do ?

Thanks

Francisco


written by: TheTechnobear

Thu, 11 Jun 2015 12:19:17 +0100 BST

odd... if it works in commander, it should work unchanged in a talker...

so, a few questions:

a) which factory setup are you running?
b) which version of EigenD?
c) if you have commander running, when you activate the talker do you get any error messages?
( I think it echoes errors from talkers, but I may be wrong)


diagnosing...
first step, my suspicion would be that the midi input talker is not being triggered... have you tested this, for example by just trying to trigger the metronome?

next step, the best thing is to take a look at the EigenD logs, you can then just look for errors.
if you post them somewhere (dropbox etc?) then I could take a look.

(basically we need EigenD.0.log AFTER you have tried to activate it from the midi input talker and ONLY do that, we don't want to hunt thru a 12GB log file looking for one line :))

you can also run EigenD from the command line with
EigenD --stdout --debug
this will put the log to the terminal window and also display more info, this is quite handy, as you can then see immediately, when you send in your midi input, if any errors are cropping up.

Mark


written by: fcolasanto

Thu, 11 Jun 2015 22:40:47 +0100 BST

Hi Mark, thanks a lot for your quick answer. You can download from here:

https://www.dropbox.com/s/82bvbhv096p30f3/Eigen_Colasanto.zip?dl=0

a folder with the log file, setup file and a video with the explanation of the problem. As you will see, I'm using 2.1 version but with 2.0.74 I had the same problem. Thanks a lot.

Francisco


written by: keyman

Fri, 12 Jun 2015 19:06:23 +0100 BST

Hi Francisco,

I took the liberty of look at it ;-)

Only thing i change was to do about space formatting of the sentence

keygroup 1 hey _____ scale____ to______ user 1 ____ set

(this is what IS actually inside the your talker) and changing to this, cures the problem

keygroup 1 hey scale to user 1 set

Some weird copy/paste??
Some are correct, like:

keygroup 1 hey scale to natural major set

others not so (but seem to work):

keygroup 1 hey scale to bebop tonic minor set

-.-
do try correcting this, if it fixes

Cheers
keyman



Please log in to join the discussions