Forum rss-feed

Forum

Workbench: Modifying Pico setup for Tau

Most Recent

written by: carvingCode

Oberon was right. As soon as I get everything all tweaked, I'll post a copy of the setup here in case other Tau users want to give it a go.

written by: carvingCode

Sun, 26 Aug 2012 15:13:14 +0100 BST

Any suggestions?

I modified the Pico 4 AU/MIDI factory Pico setup, adding the 'Tau Keyboard' in place of the Pico. Rewired the Tau Keyboard into place. Saved it as a new setup.

I got the Mode keys to display, although will need to reposition those. The Metronome key worked fine.

Was not able to get AUs to play, even after selecting them as normal fro Stage.

Is this not a valid way to modify/repurpose an existing setup? Seems as though it should work with the proper modification, as all Agents, etc. are identical.

Thoughts? Suggestions? What did I miss?

Thanks,

Randy


written by: carvingCode

Tue, 28 Aug 2012 11:44:27 +0100 BST

Good catch, Oberon. Will give that a go.


written by: 0beron

Tue, 28 Aug 2012 11:52:51 +0100 BST

You'll probably need to edit the keygroup agent that is connected to the Tau keyboard and map the keys in 4 courses. Your setup is probably still configured with the default pico key layout, which means large parts of the Tau keyboard are unmapped?


written by: carvingCode

Tue, 28 Aug 2012 15:01:13 +0100 BST

Oberon was right. As soon as I get everything all tweaked, I'll post a copy of the setup here in case other Tau users want to give it a go.



Please log in to join the discussions